The 12V 13A power supply for BOROTTO LUMIA 56 is designed to provide the electrical power required by the incubator during operation.

It converts the mains voltage to 12 V DC and can deliver up to 13 A. Therefore, the maximum output power is 156 W. This allows the unit to supply the electronics, ventilation, heating system and other internal devices of the LUMIA 56.

The connection to the LUMIA 56 is made through a 4-pin circular connector compatible/equivalent to the KYCON KPPX-4P. This connector provides the direct electrical connection between the power supply and the incubator.

For connection to the mains, the unit is equipped with an IEC 60320 C14 inlet. The power cord uses an IEC 60320 C13 connector on the power supply side. On the opposite end, the mains plug complies with the electrical standard of the country of use.

Even in less visible components, BOROTTO pays attention to every element that contributes to the continuity and reliability of the incubator. Indeed, accompanying the development of life means taking care of the entire system. This includes everything from control technology to the electrical power that allows it to operate.

In this way, BOROTTO puts technology at the service of nature, developing solutions designed to work in harmony with the architecture of the machine.

Compatibility: BOROTTO LUMIA 56
Input: 100–240 V AC – 2.5 A
Frequency: 50/60 Hz
Output: 12 V DC – 13 A
Maximum output power: up to 156 W
Connector to incubator: 4-pin circular connector compatible/equivalent to KYCON KPPX-4P
Power supply inlet: IEC 60320 C14
Power cord connector, power supply side: IEC 60320 C13
Mains plug: Compliant with the standard of the country of use
Product type: Replacement power supply for BOROTTO LUMIA 56